HomeKit enabled myQ Gateway

I am a big fan of HomeKit and Apple’s effort to have one central app to control smart home devices. While it has its flaws and limitations, the main value for my household is simply that all of my smart home accessories are centralized in Apple’s Home app. I don’t need to install anything on family members’ phones, and it minimizes tech support from me. The one thing that was not natively available through HomeKit was my garage door opener. I used meross with HomeKit for a few months, but I was having reliability issues with flaky wifi, and it required using a door sensor, which was also unreliable when wind would move the gate just enough to trip the sensor. A better option would have been ratgdo, but I really wanted a wired network connection. That’s when I settled on the LiftMaster 828LM internet gateway. ...

October 28, 2026 · 6 min · BC

Raspberry Pi Backup

# Disk Backup Create a disk image of the SD card using Mac OS X. Connect the SD disk to the host machine and search for the disk, diskutil list. bubbamac:~ bubba$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *256.1 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_HFS OSX SSD 255.2 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *3.9 GB disk1 1: WINDOWS_FAT_32 BOOT 62.9 MB disk1s1 2: Linux 33.6 MB disk1s2 The disk to be cloned is /dev/disk1. Initialize the clone by specifying the source disk and destination file. ...

June 14, 2014 · 2 min · BC

Raspberry Pi SSH Configuration

# Enable RSA Authentication For convenience and security, turn on RSA authentication in sshd. sudo vim /etc/ssh/sshd_config

June 14, 2014 · 1 min · BC

Raspberry Pi Wireless Network Setup

# Installation Before beginning, make sure your device is updated. sudo apt-get update sudo apt-get upgrade # Verify USB Device This guide is based on the Edimax USB wireless adapter. With the Raspberry Pi turned on and booted, plug in the wireless module. Check for USB devices using lsusb. pi@raspberrypi:~$ lsusb Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] pi@Rasputin:~$ Verify that the kernel module was loaded, lsmod. Module 8192cu should be in the list. If the USB device is not seen in theses, try unplugging the wireless adapter and plugging it back in to reinitialize it. Otherwise, try rebooting. ...

June 14, 2014 · 3 min · BC

Raspberry Pi Bluetooth setup

# Setting up Bluetooth Plug in USB dongle and using the command lsusb to get a list of connected devices. pi@raspberrypi:~$ lsusb Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Install USB software: sudo apt-get install bluetooth bluez-utils blueman Check for bluetooth status ...

June 10, 2014 · 2 min · BC

Raspberry Pi and Node.js

Prerequisites Raspberry Pi (Model B) 8GB SD card (class 4) Micro USB cable USB wall charger with minimum specs of 700mA at 5V. The basics: monitor, keyboard, mouse, and wired network connection. Installing Raspberry Pi (NOOBS) Detailed setup instructions can be found here. SSH is installed by default. After initial setup, Raspberry Pi can be run in a headless configuration. Download offline or online setup. Extract and copy files to FAT formatted SD card. Plug in the SD card into the Raspberry Pi. Plug in keyboard, mouse, monitor, and network. Lastly, plug in the power. OS Installation The NOOBS installation will have a few choices for OSes to install. This tutorial is based on the Rasbian flavor. ...

June 9, 2014 · 2 min · BC

Tools

Some tools and common setup commands. # Text Editors # MouStand Simple Markdown editor with splitview editing – md on the left, formatted text on the right. # Sublime Text 3 Basic text editor with package manager, plugins, and other rich features. # Enabling syntaxt highlighting in Vim Using the terminal Vim client, turn on syntax highlighting by adding the following line to ~/.vimrc syntax on # Vim reference http://www.cs.swarthmore.edu/help/vim/home.html Open Vim ...

February 24, 2014 · 2 min · BC

Disabling Password Login on EdgeMAX Routers

Enabling public key authentication on the EdgeMAX router is not as straight forward as manually configuring sshd_config and adding an authorized key. Running through the CLI configuration manager is the appropriate procedure in this case. Using the configure command, the ssh settings and the public key will be added to the routers configuration file, which is convenient when backing up settings and restoring configurations. The setup is based on the EdgeRouter Lite (firmware v1.4.0) and the ubnt wiki. ...

February 8, 2014 · 1 min · BC

EdgeRouter Lite Ad Blocking

The Ubiquiti Networks EdgeRouter Lite is a powerful, Linux based wired router. For under $100 you get a dual-core MIPS64 CPU, hardware accelerated packet processing with encryption/decryption, 512 MB DDR2 RAM, and 2 GB flash storage. It is marketed as a sub-$100 million packet per second router. All that sounds pretty awesome, but the biggest feature I was interested in was the configurability and software features. I have played around in DD-WRT on an aging Linsys WRT54G but it always left more to be desired. I was even considering building a Linux based rig as a router for more flexibility and performance enhancements of my home network. After some research, the EdgeRouter Lite seemed like the perfect package – small, Linux based OS, cheap, and low power consumption. ...

February 5, 2014 · 3 min · BC

Synology NAS

Some notes regarding Synology NAS device setup and other tasks. # Services and Daemons Services reside in the system user directory. I’m not very familiar with BSD based OSes, but in Linux, I would usually go to /etc/init.d/ dir to find/restart any service or daemon needed. Restarting services and daemons must be done in the /usr/syno/etc.defaults/rc.d/ directory. You will need to list the directory as the service file names have an ID appended. For example, restarting SSH: ...

January 24, 2014 · 1 min · BC